Siemens L-850D/E F-Range Style 2 Inset Lights manual General information

L-850D/E F-Range Style 2 Inset Lights General Information and Requirements

General information

Siemens Airfield Solutions 12” F- Range inset lights

The Siemens Airfield Solutions 12” F-Range Inset Lights are light fixtures which provide optimum visual guidance with minimal maintenance, low life-cycle costs and maximum reliability. They are designed to withstand the high impact and roll- over loads imposed by today's widebody aircraft during landing and take-off operations while remaining waterproof and serviceable.

The 12” F-Range fixtures are shipped ready for installation on FAA L-868 deep bases with an adapter ring (see “Overview of FAA deep bases and Siemens Airfield Solutions adapter rings” page 13). An alternate approach to mounting the F-Range fixtures is to install them on L-868C or on LB1/4/4A bases using an adapter ring. Contact Siemens Airfield Solutions Sales Department for shallow base mounting options.

The 12” F-Range family types are intended for the following uses:

•L-850D: Combined Threshold and Runway End

•L-850E: Threshold and Threshold Wing Bars

•FEN: Runway End (not submitted for FAA certification)

•FAP: Approach Centreline and Side Row Barrettes (not submitted for FAA certification)

Purpose of this	This manual describes procedures for the installation, maintenance and
manual	troubleshooting of the 12” inset light family.

Scope of this manual

This manual covers the light fixtures manufactured in accordance with FAA specification AC 150/5345-46B and the photometric requirements of the latest edition of ICAO Annex 14. Operation beyond the design limitations of these specifications may result in degradation of performance, damage or failure of components or hazardous conditions.

 2002 Siemens Airfield Solutions, Incorporated	96A0266D	6
All rights reserved	Issued 2/02