Siemens L-850D/E F-Range Style 2 Inset Lights manual Equipment data

L-850D/E F-Range Style 2 Inset Lights General Information and Requirements

Equipment data

Equipment	Each unit is supplied completely assembled, tested and sealed, ready for
supplied	installation. The electrical connection is made via 1, 2 or 3 cable assemblies with
	FAA L-823 style 2-pole plugs. The 6 mounting screws (A1) and lock washers (A2)
	or self locking nuts for holding the light on the base or adapter ring are included.
	They can be either M10 or 3/8” UNC, according to order. An o-ring gasket (E6) is
	also included.
	Each unit is individually packed in a durable, cushioned and corrugated cardboard
	box, labelled with Siemens Airfield Solutions and ordering numbers.
	At least one instruction manual is delivered per order.
Film disc cut-	For some applications, optional film disc cut-outs are available. They form an
out	electrical bypass over the lamp within 15 seconds after lamp failure. After a lamp
	failure, the film disc cut-out must be replaced.
References	Ordering codes and reference data pertinent to the light fixture and its components
	are listed in the tables on pages 30 to 44.
Differences	All the inset lights used for a particular function look externally identical. The
between	differences between versions depend on the beam colour and the optical support
versions	inside. Make sure to use the correct version when installing the light onto its base.
Beam color	The colors of the light beams are identified by colored points on the top of the
	window. A red point, for example, refers to a corresponding red colored beam.

In the 12” F-Range inset lights, light beam coloration is obtained by a dichroïc coating applied on the inner face of the prism. Therefore, no separate color filters are required.

 2002 Siemens Airfield Solutions, Incorporated	96A0266D	7
All rights reserved	Issued 2/02