Installation |
General recommendations
Receiving, storage and unpacking
Electrical connection
Location and tolerances
1.Upon receipt of goods at the site store, check all packings for visible damage. Every damaged box should be opened and its content inspected for damage.
If equipment is damaged, a claim form shall be filed with the carrier immediately. It may then be necessary for the carrier to inspect the equipment.
2.Store the light assembly preferably in its original packing in a protected area. When stored unpacked, please take care not to damage the cable insulation.
3.Unpack the light assembly at the installation site to avoid damage during transportation and handling.
The light assemblies covered by this manual are designed for connection to 6.6 or
The isolation transformers are to be ordered separately.
The applicable documents for location details and tolerances are the following:
| Organisation | Applicable documents |
|
|
|
|
|
| ICAO | Annex 14 |
|
|
|
|
|
|
| Aerodrome Design Manual Part 4 |
|
|
|
|
|
| FAA | Advisory Circular AC |
|
|
|
|
|
|
|
|
|
2002 Siemens Airfield Solutions, Incorporated | 96A0266D | 10 |
All rights reserved | Issued 2/02 |
|
