Siemens L-850D/E F-Range Style 2 Inset Lights manual Lifting tools, Procedure

L-850D/E F-Range Style 2 Inset Lights Maintenance

How to lift the light fixture out of the base or adapter ring

Lifting tools	Siemens Airfield Solutions has developed 2 models of lifting tools (see illustrations
	below):
	• Model a: simple tool used when the light fixture can be easily removed;
	• Model b: a more sturdy tool to remove the light fixture in more difficult
	conditions.
Procedure	To lift the optical unit out of the base receptacle or adapter ring, proceed as follows:
	Step	Action
	1	Remove the six fixing screws and washers (A1-A2) or self locking nuts.
	2	Fit the appropriate lifting tool (see figure below) into both holes located
		(180° apart) in the cover (B1), lift the optical unit out of the Eurobase or
		adapter ring and place it next to it.
	3	Disconnect the light fixture wires from the power wires coming from the
		transformer(s).
	4	Take the optical unit back to the maintenance base where it can be
		serviced entirely.
	Never hold the light fixture by the wires as this may damage the insulation, break
	the waterproof seal and cause insulation faults and water leakage.
	The illustration below clarifies the procedure:

 2002 Siemens Airfield Solutions, Incorporated	96A0266D	19
All rights reserved	Issued 2/02