Installing the software and device drivers

Installing the Gigaset M34 software

i

When the software has been installed successfully please do not

plug in the device until the Setup Wizard prompts you to do so.

 

 

ìRead the information under "System requirements" on page 7, before starting to install the Gigaset M34 software.

ìClose all the programs running on your PC. This also includes those programs (e. g. antivirus software), whose activity is only indicated by an icon in the status area of the taskbar (next to the clock).

Starting the Setup Wizard

ìInsert the Gigaset M34 CD into your PC's CD-ROM drive.

The Setup Wizard for the Gigaset M34 software is started automatically.

If the Setup Wizard for the Gigaset M34 software does not start automat- ically:

iì Open Windows Explorer.

ìSelect the CD-ROM drive.

ìDouble click start.exe.

The Setup Wizard guides you through the installation.

ìSelect the language in which you want to install the Gigaset M34 software.

ìClick on Next.

ìSelect your base station.

The name of your base station can be found on the unit itself, e. g. S440isdn.

The subsequent installation steps depend on the functionality of the base station.

i Options not supported by the selected base station are hidden during the course of the installation procedure.

For the full range of functions available on your base station, refer to the table "Base stations" on page 8.

ìClick on Continue.

The main menu for the installation software is opened.

10