Configuring the Gigaset M34 software
With the Gigaset M34 USB, you can set up your PC for operation on up to 6 base stations.
Particularly when the location of the PC or laptop changes often, this provides the advantage that you only need to enter the available base stations once in the configuration to be able to establish a connection from those locations at any time. However, you should note that a simultaneous connection to multiple base stations is not possi- ble.
Use the M34 USB option in the menu tree to open up the configuration of the Gigaset
M34 software. The following configuration dialogs are available:
Menu tree | Brief description |
|
|
M34 USB |
|
Status | Display connected base station and quality of connec- |
| tion |
|
|
Configuration | Register and configure Gigaset M34 USB and enter avail- |
| able base stations |
|
|
Firmware update | Update device software for your Gigaset M34 USB |
|
|
ìOpen the Gigaset M34 software and select the M34 USB > Status option in the menu tree.
The working area displays up to date information about the connection to the base station:
Connected base:
If a connection already exists, the name of the base station to which your PC is con- nected via the Gigaset M34 USB is shown.
Field strength:
The signal strength of the wireless connection is indicated in the form of a bar.
Connection status:
The wireless connection can have the following operating statuses:
–Initialise
Connecting; searching for an available base station.
–No connection
No connection to base station or connection broken.
–Active
Your PC is connected to the base station displayed.
19