Configuring the Gigaset M34 software

Connecting the base station

When you register a base station, it is connected immediately. If several base stations are registered, you can choose which one to connect to. The base stations that are not connected do not need to be deregistered. This allows you to switch between different base stations without having to set them to registration mode again.

ìOpen the Gigaset M34 software and select the M34 USB > Configuration option in the menu tree.

ìUnder Base stations click on one of the base stations that is registered but not con- nected.

The Connect button is activated.

ìClick on the base station you want to connect.

ìClick on Connect.

Calling the Gigaset M34 USB

A connection between your handset and the M34 USB allows you to access the PC through your handset. The requirement for this connection is that your handset is registered on the same base station as the Gigaset M34 USB. To create the connection between your handset and the Gigaset M34 USB, make a free internal call from the handset to the Gigaset M34 USB.

ìPress the INT key on your handset.

ìChoose the Gigaset M34 USB as the internal party. The internal name under which it is registered on the base station can be seen in the Gigaset M34 software under M34 USB > Configuration > Name:.

ìPress the Talk or Handsfree key on the handset to make the internal connection.

!Note that your handset will be blocked to other calls for the duration of the internal connection.

21