Registering a base station
ì Open the Gigaset M34 software and select the M34 USB > Configuration option in the menu tree.
ì Under Base stations click on one of the <free base> options. The Register button is activated.
ì Set the base station to registration mode.
– Hold down the Registration key until you hear an acoustic signal or see a flashing LED to indicate registration mode.
– Refer to the operating instructions for your base station for more details.
ì Click on Register to begin registration. This opens the Register dialog.
ì Enter the PIN for the base station (factory default "0000") and confirm your entry with OK.
ì Wait until registration has been completed. The Register dialog is closed.
ì For further information refer to "Registering a base station" on page 15.
20

Configuring the Gigaset M34 software

Configuring the Gigaset M34 software

You can make various settings in the Gigaset M34 software: change the names of your devices, register or deregister base stations, connect devices to one another, control the power management feature and update the firmware if necessary

Changing device names

When connected to a base station, your PC is uniquely identifiable by its device name. You can change this device name as required.

ìOpen the Gigaset M34 software and select the M34 USB > Configuration option in the menu tree.

The working area shows the current device name of the Gigaset M34 USB.

ìEnter the desired device name under Identification > Name:. The maximum length of the device name is 10 characters.

ìConfirm your entry by pressing the return key (Return, Enter). The new device name is sent to the connected base station.

If you also want to change the device name of your PC for connections to i another registered base station, first of all connect to the desired base

station and then repeat this procedure.