Installing the software and device drivers
Software
uOperating system
Windows 2000 (Service pack 4) or Windows XP.
Have the installation CD for your Windows operating system to hand. During the installation of the Gigaset M34 software, the Setup Wizard checks the configuration of your operating system. You may be prompted to install certain additional Windows components.
uUser rights
It is necessary that you are logged in as a user with administration rights. Contact your system administrator for details if necessary.
uDialler blocker
If necessary, uninstall any existing dialler blocker to prevent possible problems when installing the USB drivers.
Pack contents
u1 Gigaset M34 USB PC adapter u 1 USB extension cable
u 1
Preparing the base station
ìRead the operating instructions for your base station.
ìConnect your base station.
–Connect your base station to your phone line or PABX using the telephone cable.
–Connect the base station to the power supply using the mains adapter.
Your base station is now ready for use.
Now that your base station is ready for use, you can make external calls and also take incoming calls.
It is not necessary to install the Gigaset M34 software to do this.
ìYou can check that your base station is working properly by dialling an external telephone number.
ìIf you cannot make the call, check your phone line or the settings for
iyour PABX.
You will find a detailed description in the operating instructions for your phone line or PABX.
Gigaset SX2xxisdn
To make calls, you also need to register a handset on the base station. You will find a detailed description of the registration procedure in the handset's operating instructions.
9