Configuring the Gigaset M34 software

Configuring power management

You do not have to do without the Gigaset M34 USB functions, even if your PC is in standby mode. You can configure the Gigaset M34 software so that your PC is automatically activated when an internal call is received.

ìOpen the Gigaset M34 software and select the M34 USB > Configuration option in the menu tree.

The options for PC activation are shown in the working area.

ìUnder Wake-up, choose whether your PC is to be automatically activated for an internal call.

Firmware update

The firmware is the device software stored in your Gigaset M34 USB. If your Gigaset M34 USB no longer functions correctly or if you want to operate it with more recent software, you can update the firmware. To do this, first check which firmware version is currently being used. Then either download the most up to date version of the firmware from the Internet or use the firmware on the CD.

Checking the firmware version

ìOpen the Gigaset M34 software and select the M34 USB > Configuration option in the menu tree.

The version numbers of the installed hardware and software for your Gigaset M34 USB are shown in the working area.

ìCompare the version numbers shown with the information you have received with your new firmware.

!

u Update the firmware only if your devices are not working properly.

u

Only carry out a firmware update if the version number of your new

 

firmware is higher.

 

u

Note that a firmware update does not eliminate any hardware faults.

 

 

 

23