For further information, refer to the operating instructions for the rele- vant base station.
ì Open the Gigaset M34 software and select the M34 USB > Configuration option in the menu tree.
ì Under Base stations click on one of the <<free base>> options. The Register button is activated.
ì Set the base station to registration mode.
– Hold down the Registration key until you hear an acoustic signal or see a flashing LED to indicate registration mode (no signal on C340).
– Refer to the operating instructions for your base station for more details.
ì Click on Register to begin registration. This opens the Register dialog.
ì Enter the PIN for the base station (factory default "0000") and confirm your entry with OK.
ì Wait until registration has been completed. The Register dialog is closed.
Once the connection between your base station and the M34 USB has been estab- lished, you will see the base station data on your PC. The Name: field contains the name under which the Gigaset M34 USB has been registered on the base station. You will need this name to establish the connection between the handset and the M34 USB.
Installing the software and device drivers
Registering a base station
You can register your Gigaset M34 USB on up to 6 base stations. To do this, you enter the base stations available at the relevant location of the PC in the Gigaset M34 soft- ware. The registered base stations are saved in the software and you can then connect to one of the registered base stations as required.
Requirements:
uThere must be a free space in the list under Base stations.
uThe base station must be in registration mode before commencing
i the registration procedure.
uThe base station PIN must be entered during registration.
15