6SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1072 • September 2008
■On the SPARC Enterprise M8000/M9000 servers with XCP 1050 or later, the dual
XSCF Unit feature is working. Therefore, you can not downgrade SPARC
Enterprise M8000/M9000 servers with XCP 1050 or later to XCP 1040 or XCP
1041, which does not support dual XSCF Unit feature.
■You cannot use the following user account names, as they are reserved for system
use: root, bin, daemon, adm, operator, nobody, sshd, rpc, rpcuser, ldap,
apache, ntp, admin, and default.
■The Firefox 3 is not supported in XSCF Web.
■Using the XSCF Web, when you import XCP or update the firmware, Session ID
error may be displayed on the web browser. And in the Autologout setting, when
you specify the timeout period as over 30 minutes, Internal Server Error might be
displayed when you perform the firmware update. Please close the current
browser and open the new browser to reconnect to XSCF Web.
■When you use the XSCF Web, if a plug-in such as the search tool installed with
the browser, remove the plug-in or disable the pop-up blocking.
■XSCF-LAN is compliant with auto-negotiation. When you connect XSCF-LAN
and the network device which has been fixed to the full-duplex mode, according
to the IEEE 802.3 rule, XSCF-LAN communicates in the half-duplex mode. Due to
this, network communication speed may slow down or communication error may
occur. Do not fail to set the network device which connects with XSCF-LAN to the
auto-negotiation mode.
■While you are performing DR operation to a COD board, do not execute the
addcodlicense(8)/deletecodlicense(8)/setcod(8) command.
■The restoredefaults(8) command is not supported in this release.
■If your domain is running one of the following versions of Solaris OS:
■Solaris 10 5/08 OS
■An earlier version of Solaris 10 OS with patch ID 127127-11
Then you must set the following parameter in the system specification file
(/etc/system):
set heaplp_use_stlb=0
Then reboot the domain.
For more information, refer to CR 6718173 in TABLE 4.