Information about Software 27
Software Documentation Updates

This section contains late-breaking software information that became known after

the documentation set was published and corrections in the SPARC Enterprise

M8000/M9000 servers software documentation.

The corrections for SPARC Enterprise M4000/M5000/M8000/M9000 servers XSCF

Reference Manual, if not otherwise specified, also apply to the man pages which

XSCF provides. And they supersede the information on the man pages.

TABLE5 lists known documentation updates.
TABLE5 Software Documentation Updates
Title Page Number Update
All SPARC Enterprise
M8000/M9000 servers
documentation
When there is the section "SPARC Enterprise M8000/M9000
Servers Documentation" in the Preface, the following document
will be added.
SPARC Enterprise/PRIMEQUEST Common Installation Planning
Manual (C120-H007)
SPARC Enterprise
M4000/M5000/M8000/
M9000 Servers XSCF
User’s Guide
Page 2-30 The maximum length of the user name is 31 characters.
Table 2-4 User Accounts Adminstration erroneously documents
a maximum user name length of 32 characters.
Page 2-91 Table 2-22 DCL Information, Configuration policy's "System :
Removal of a domain (domain deactivated)" is now refered to as
below:
"Hardware is degraded in units of domains or the relevant
domain is stopped without degradation.
Page 8-18 First paragraph in 8.1.11 is now refered as below:
If the system hangs or any of the messages shown below is
output during the firmware update, retry the firmware update.
It might be completed successfully.
SPARC Enterprise
M4000/M5000/M8000/
M9000 Servers XSCF
Reference Manual
adduser(8)
command
The maximum length of the user name is 31 characters. The
OPERANDS of the adduser(8) command erroneously
documents a maximum user name length of 32 characters.
console(8)
command
The note in DESCRIPTION is changed as follows:
When you return to XSCF shell console without logging out
from the domain, the return causes automatically logging out
from the domain.