Information about Software 25
6632549 fmd service on domain might fail to
maintenance mode after DR operations.
This has been fixed in patch 138050-01.
[Workaround]
If fmd service fails, issue the following
commands on the domain to recover:
# svcadm clear fmd
6660168 If a ubc.piowbeue-cpu error occurs on a
domain, the Solaris Fault Management
cpumem-diagnosis module might fail, causing
an interruption in FMA service.
If this happens, you will see the following
output in the console log:
SUNW-MSG-ID: FMD-8000-2K, TYPE:
Defect, VER: 1, SEVERITY: Minor
EVENT-TIME: Fri Apr 4 21:41:57 PDT
2008
PLATFORM: SUNW,SPARC-Enterprise,
CSN: 2020642002, HOSTNAME:
<hostname>
SOURCE: fmd-self-diagnosis, REV:
1.0
EVENT-ID: 6b2e15d7-aa65-6bcc-bcb1-
cb03a7dd77e3
DESC: A Solaris Fault Manager
component has experienced an error
that required the module to be
disabled. Refer to
http://sun.com/msg/FMD-8000-2K for
more information.
AUTO-RESPONSE: The module has been
disabled. Events destined for the
module will be saved for manual
diagnosis.
IMPACT: Automated diagnosis and
response for subsequent events
associated with this module will
not occur.
REC-ACTION: Use fmdump -v -u
<EVENT-ID> to locate the module.
Use fmadm reset <module> to reset
the module.
If FMA service fails, issue the following
command on the domain to recover:
# svcadm clear fmd
Then restart cpumem-diagnosis:
# fmadm restart cpumem-diagnosis
TABLE4 Solaris OS Issues and Workarounds (Continued)
CR ID Description Workaround