Information about Software 41
■Set up the CPU operational mode of the domain.
For each setting, see the SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF
User’s Guide.
21. Power on the target dom ains.
22. Confirm that the target domain has been correctly started.
23. Confirm no abnormality o ccurred by using showlogs error -v and
showstatus(8) commands.
If you encounter any hardware abnormality of the XSCF contact a service engineer.
XSCF> poweron -d domain_id
XSCF> showlogs power
XSCF> showlogs error -v
XSCF> showstatus