Getting started | 11 |
•Insert the battery cover beneath the camera lens 4 with the re-
taining lugs at the top, and then press down at the back 5 until it clicks into place.
4 5
•To remove, lift the battery cover up and off 6.
6
Additional information
Please switch off your phone before removing the battery!
1.8and 3 volt SIM cards are supported. Please contact your service provider if you have a different card.
•To insert, lay the card in the carry- ing tray 1(ensure that the cham- fered corner is in the correct position). Push the carrying tray
with the card into the phone until it clicks into place 2.
1
2
•Press the small button to remove 3 (e.g. with a pin). The card tray will pop out a little and you can remove it.
3
•Before removing the
RS MultiMediaCard, call up the Eject card function in the options menu for My stuff. This saves data you have not yet saved and avoids losing data.