78 Setup

Call setup

 

C¢T¢Call setup

 

¢Select function.

 

Hide ID

b

When you make a call, your phone number can be displayed on the re- cipient's display (depending on the service providers).

To suppress this display, you can enable the "Hide ID" mode for all subsequent calls or just for the next call.

You may need to register separately with your service provider for these functions.

Call waiting

b

If you are registered for this service, you can check whether it is set and you can activate/deactivate it.

Divert

Select the condition under which calls should be diverted to your mailbox or another phone number. To set diversion:

I

Select condition,

e.g. Unanswered.

ñConfirm change, then select Set.

J

Enter phone number.

 

All calls

All calls are diverted.

ÇSymbol in the top line of display in standby mode.

Unansweredb

Includes the conditions Not reachable, No reply, Busy, see below.

Not reachable

Divert occurs if phone is switched off or is out of range.

No reply

A call is only diverted after a delay that is determined by the network. The period can be set to a maximum of 30 seconds in 5-second intervals.

Busy

Divert occurs if a call is in progress. If Call waiting is activated, you will hear the call waiting tone during a call.

Receiving fax

b

Fax calls are diverted to a number with a fax connection.

Receiving data

b

Data calls are diverted to a phone number with a PC connection.

§Options§ Open, then select Save.