82 Setup
Device manag.
The device manager can be used, for example, to transfer configuration data from the service provider via WAP push (page 53).
The phone default setting varies from service provider to service provider:
•The settings have already been implemented by the service pro- vider. You can start immediately.
•Access profiles have already been created by your service provider. Then select profile and activate.
•The access profiles must be con- figured manually. If necessary, contact your service provider. You will also find the current settings for the service provider on the In- ternet at
www.siemens.com/ mobilephonescustomercare under "FAQ".
Active access
I | Select function. |
§Start§ Establish a connection to the active profile.
• Profile active
After the data has been transferred:
§OK§ Confirm.
• No profile active
The list of profiles is chosen for you to choose from.
I Select profile.
ìActivate the profile.
Or
§Options§ Open menu, then select Edit and make entries.
Last connection
öThe data for the last con- nection is displayed.
Master reset
The phone is reset to the default values (factory setting). This does not affect SIM card and network settings or data saved during Instant Messaging.
Alternatively, in standby mode enter:
* # 9 9 9 9 # A