Siemens se5880 manual Easy IKE/IPSec Setup

SIEMENS se5880 Ethernet Security Router	Chapter 6 Security Setup
User’s Guide	IKE/IPSec Configuration

Easy IKE/IPSec Setup

Internet Key Exchange (IKE) is a means of dynamically creating IP Security (IPSec) connections. IPSec uses encryption and authentication to virtual private networks over an insecure network. The Easy IKE/IPSec Setup form is used to create a default IKE configuration.

To perform Easy IKE/IPSec setup:

1.Click Easy IKE/IPSec Setup from the left navigation pane of the IKE/IPSec Information page. This displays the Easy IKE/IPSec Setup page.

2.In IKE Peer Name, enter a logical name for an IKE Peer. This name is of no importance to the remote IKE peer. Choose a name that is meaningful to you.

3.In Pre-shared Secret, enter a case-sensitive character string used for authentication. This secret can be up to 256 characters, with no spaces or non-printable characters. The pre-shared secret must be mutually agreed upon by both parties to the IKE connection.

4.In Peer Gateway IP Address, enter the IP address of the gateway at the remote end of the IKE connection.

5.In Destination IP Address, enter the IP address of the remote private network that your system will authenticate using this IKE policy.

6.In Destination Subnet Mask, enter the destination subnet mask of the remote private network that your system will authenticate using this IKE policy.

7.Click Apply.

SIEMENS 64