Siemens se5880 manual Siemens

SIEMENS se5880 Ethernet Security Router	Chapter 6 Security Setup
User’s Guide	IKE/IPSec Configuration

5.From the ESP Encryption Type drop-down menu, select one of the following to specify the algorithm to use to encrypt ESP IPSec packets:

•DES: Encrypts using a 56-bit key.

•3DES: Encrypts using three 56-bit keys to produce 168-bit encryption.

•NULL: ESP encapsulation, but no data encryption. ESP encapsulation verifies the source, but data is sent in the clear to increase throughput.

•NONE: No ESP encapsulation and no encryption is used.

6.From the IP Compression Method drop-down menu, select one of the following to specify the algorithm to to use to compress IPSec packets: LZS IP compression or None.

7.In Phase II Proposal Lifetime, enter the number of seconds after the IPSec SA expires. The default is 1800 seconds. Once this time is elapsed, the system will renegotiate the IKE connection.

8.In Phase II Proposal Life Data, enter the amount of data, measured in kilobytes, before the IPSec SA terminates. After the specified quantity of data has been transferred, the system will renegotiate the IKE connection. If zero is entered, the data quantity will be unlimited. By setting a limit on the amount of data transferred, the risk of a key becoming compromised is reduced.

9.Click Apply.

SIEMENS 69