Siemens SX763 Hex, Hex, Key, Key, ASCII, ASCII, Click, With a, With a, With a, Key type, Select the, It is very, Confirm key, Confirm key, Enter up to four keys in fields

Configuring Advanced Settings

Manual key entry

ìSelect the Key type, Hex or ASCII.

If you select Hex as the key type you can use the characters 0 to 9 and A to F.

–With a 64-bit encryption depth, the key is 10 characters long. An example of a valid key: 1234567ABC

–With a 128-bit encryption depth, the key is 26 characters long. An example of a valid key: 234567ABC8912345DEF1234567

If you select ASCII as the key type, you can use the characters 0 to 9, A to Z, a to z plus the special characters in the ASCII character set.

–With a 64-bit encryption depth, the key is 5 characters long. An example of a valid key: GIGA1

–With a 128-bit encryption depth, the key is 13 characters long. An example of a valid key: GIGASET_SX76x

ìEnter up to four keys in fields Key 1 to Key 4 and confirm them by entering them again in fields Confirm key 1 to Confirm key 4.

ìSelect one of the four keys as the Default key.

Note:

uIt is very important that you make a note of the key(s) that have been entered or generated. You will need this information to configure the wireless network adapters properly.

uWhen you have concluded the configuration, you must change the WEP encryption in the wireless network adapters for the connected PCs in the same way as they will not otherwise be given access to the wireless network of the Gigaset SX763 WLAN dsl.

ìClick OK to apply the settings.

83