Siemens V 4.0 manual Flag Token Debug Token Cmprefix Statement

Configuration language

7.2.3 Syntax

This section describes the syntax of the configuration language in the notation used by the UNIX command yacc.

%{

%}

%start sysblock

%union
{
long	number;
char	string[80];
}
%token <number> NUMBER		/* positive integer	*/
%token BACKUP		/* flag	*/
%token DEBUG		/* flag	*/
%token CM_PREFIX		/* statement	*/
%token SYSTEM		/* statement	*/
%token HOST		/* statement	*/
%token APPLICATION		/* statement	*/
%token CM_APPLICATION		/* statement	*/
%token TA_APPLICATION		/* statement	*/
%token MASTER		/* flag	*/
%token MAX_STMT		/* statement	*/
%token KEYVECTOR		/* statement	*/
%token OPENINFO		/* statement	*/
%token PORTADDRESSES		/* statement	*/
%token INTERNETADDRESS		/* statement	*/
%token REPOSITORY		/* statement	*/
%token START_VALUE		/* statement	*/
%token OPERATING_SYSTEM		/* statement	*/
%token UFN		/* flag	*/
%token USE_CM_APPLICATIONS		/* statement	*/
%token <string> INADDRESS		/* Internet address	*/
%token <string> LETTER		/* string with a..Z,0..9, _	*/
%token BBOPEN		/* {	*/
%token BBCLOSE		/* }	*/
%token SBOPEN		/* (	*/
%token SBCLOSE		/* )	*/

166 GINA V4.0 System Administrator Guide – September 2000