Siemens V 4.0 manual Deinstallation, Unix Solaris, Sinix

Druck vom 24. 01.2001 17:00.23 install

Deinstallation

3.4 Deinstallation

The installation procedures used depend on the system base; the variants described below are examples only.

Installation and deinstallation should, therfore, always be carried out as described for your system base or in accordance with the information contained in the Release Notice. ❍ ❍ ●

System-specific commands are used to deinstall GINA.

3.4.1UNIX (Solaris, SINIX)

1.Log in as root.

2.Switch to the GINA directory: cd /opt/gina/GINA

3.Delete all GINA subdirectories and files using the system command: pkgrm gina

4.Delete the GINA root directory:

cd /

rmdir /opt/gina/GINA

5.Remove the gina user set up at installation.

6.Remove the tmns user group set up at installation.

3.4.2UNIX / HP-UX

Deinstallation of GINA under HP-UX is performed using the swremove command.

The swremove command opens a menu interface via which the information required for deinstallation is queried.

The GINA package is then deinstalled, and the subdirectories and files are deleted.

GINA V4.0 System Administrator Guide – September 2000 23