Siemens V 4.0 manual Priority, High , Medium , LOW

Creating a configuration file using WinConfig

Priority...

The menu item is used to customize the PRIORITY statement in line with TAC class control.

The following dialog window is displayed when this menu item is called:

Figure 22 Dialog window: Priority-System

The following table describes the dialog window entries; the “Statement” column specifies the corresponding statement that is generated by WinConfig when saving to a configura- tion file.

Parameter name	Value	Default	Statement
High	Maximum number, the number of	0	PRIORITY
	processes in the application that
	can work concurrently with the TAC
	class with the priority HIGH.
Medium	Maximum number, the number of	0	PRIORITY
	processes in the application that
	can work concurrently with the TAC
	class with the priority MEDIUM.
Low	Maximum number, the number of	0	PRIORITY
	processes in the application that
	can work concurrently with the TAC
	class with the priority LOW.
Sync_Wait	Specifies for which of the three TAC	-	PRIORITY
	classes synchronous calls are per-
	mitted. Possible values:
	HIGH, MEDIUM, LOW
	Selected via a pull-down menu

132 GINA V4.0 System Administrator Guide – September 2000