RS232 SERIAL COMMUNICATIONS
(Special Order Only)
The Parity (Even or None) and the Baud Rate (2400 or 9600) are selectable by setting DIP switches SWa and SWb, accessible from the right side of the instrument case.
| ON |
|
| OFF |
|
| SWa SWb | |
| Parity (SWa) | Baud Rate (SWb) |
| ON = Even | ON = 2400 |
| OFF = None | OFF = 9600 |
Baud Rate: | Programmable for 2400 or 9600 Baud | |
Parity: | Programmable for Even or None |
|
Data Bits: | For Even Parity (7 data bits) |
|
| For Odd Parity (8 data bits) |
|
Stop Bits: | One |
|
Delimeter: | CrLf (Carriage |
|
| �������������� |
|
Notes: | In the following tables, each command or request element | |
| separated with square brackets [ ] is for clarity only. | |
��������������������������
[value] is indicated as % of full scale and takes the following form: signxxx.xx
When entering commands, unless a minus sign is included, value will be accepted as positive.
When responding to a request, value will contain a +/- sign followed by a number complete to two decimal places.
[counts] will represent an actual number within a defined range.
Page 15
