5.Configuring the MP215 With Wireless Expert

For Windows and NT users, basic MP215 configuration can be done via the Wireless Expert utility. (Note that Wireless Expert does not permit configuration of auto-switching operational timers, or all S-registers.) Configuration of all other parameters must be done via AT-commands and requires the use of a terminal emulation program such as Hyperterm. Provisioning via AT-commands is detailed in Section 4.

5.1.Setup

1.Prepare the MP215

Ensure a cellular antenna is connected to the MP215.

Connect your PC to the MP215 using a serial cable connected to the PM215’s serial port.

Ensure power is applied to the MP215.

2.Start Wireless Expert

Normally Wireless Expert is found in the Watcher folder of the Programs folder in the Start menu.

3.Select MP215 from the Modem List screen.

PN 2110036 Revision 1.0

05/11/99

5-1

Page 23
Image 23
Sierra Wireless manual Configuring the MP215 With Wireless Expert, Setup