Sierra Wireless Configuring the MP215 via AT Commands, Configuring the MP215 for CSC mode

6.Configuring the MP215 via AT Commands

6.1.Configuring the MP215 for CSC mode

To configure the MP215 for AMPS operation, the modem must first be in CS-CDPD mode:

AT+WS181=1	Places the MP215 into CS-CDPD
	mode

Programming the NAM

It is possible to program up to two NAM’s on the MP215.

AT+WVESN (optional)	Displays the ESN (to confirm you’re
	programming the right modem)
AT+WS178=<n>	Selects NAM to be programmed
<n>=1 or 2
AT+WPNAM? (optional)	Displays current NAM
AT+WPNAM=<number>,<homesysid>	Programs the NAM
Programming the CS-CDPD Modem Bank Dial Code
AT+WPCSDC=<number>	programs the modem bank dial code

6.2. CDPD Provisioning

To configure the MP215 for CDPD operation, the modem must first be put into CDPD mode:

AT+WS181=0	Places modem in CDPD mode
Programming the NEI
Note the MP215 will support only 1 NEI
AT+WPEID (optional)	Displays modem’s EID (to confirm
	you’re programming the right
	modem)

PN 2110036 Revision 1.0 05/11/99 6-1