Note: Before you install the PinPoint X in its final location, be sure to cover all exposed wiring.
Rev 4.0 Oct.09
Inputs, Relay Outputs, and Power Status
Tip: The relays are only capable of switching small loads. If you need a stronger signal, such as to open a door lock, you can connect the PinPoint X’s relay to a stronger solenoid relay which has enough power to cause the desired effect.
Connecting devices to the I/O Port
You can purchase an optional I/O Wiring Harness for the PinPoint X which can be used to attach devices to the I/O port. The harness has pre‐wired leads to allow you to customize your own connections. The wires are paired and color‐coded.
22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | |
|
|
|
|
|
|
|
|
|
|
| |
DIN1 | GND | DIN3 | GND | Relay | 1 | Rsv | NC | AIN1 | GNDAIN3 | ||
|
|
|
| NO1Com1 |
|
|
|
|
| ||
DIN2 | GND | DIN4 | GND | Relay 2 | Rsv | NC | AIN2 | GND | AIN4 | ||
|
|
|
| NO2Com2 |
|
|
|
|
| ||
11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | |
Figure 5-3: PinPoint X I/O Port Diagram (not to scale)
Table
1. | Analog Input 4 | 12. | Analog Input 3 |
|
|
|
|
2. | Analog Ground | 13. | Analog Ground |
|
|
|
|
3. | Analog Input 2 | 14. | Analog Input 1 |
|
|
|
|
4. | No Connect | 15. | No Connect |
|
|
|
|
5. | Reserved for future use | 16. | Reserved for future use |
|
|
|
|
6. | Com2 (for use with #7) | 17. | Com1 (for use with #18) |
|
|
|
|
7. | Normal Open Relay | 18. | Normal Open Relay |
|
|
|
|
8. | GND | 19. | GND |
|
|
|
|
9. | Digital Input 4 | 20. | Digital Input 3 |
|
|
|
|
10. | Ground | 21. | Ground |
|
|
|
|
11. | Digital Input 2 | 22. | Digital Input 1 |
|
|
|
|
28
