15. Cleaning of the DVD player |
| 17. Troubleshooting |
Clean the housing of the DVD player with a slightly damp cloth and a mild cleanser only. When cleaning, make sure that no moisture gets into the DVD player!
Clean the inside of the disc tray, if necessary, exclusively with a clean dry brush (i.e. a lens brush obtainable from a photographic dealer). Never clean the inside of the disc tray with anything moist!
Warning!
Moisture penetrating into the DVD player creates the risk of an electric shock! The DVD player may also be irreparably damaged!
16. Disposal
Disposing of the appliance
Do not, under any circumstances, discard the appliance in the house- hold refuse.
This appliance is subject to the European Guidelines 2002/96/EG.
Dispose of the appliance through an approved disposal centre or at your community waste facility.
Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.
Disposing of batteries!
Do not dispose of the batteries with household waste. Every consumer is legally obliged to dispose of batteries at a collection site of his community/city district or at a retail store.
This obligation is intended to ensure that batteries are disposed of in an en- vironmentally safe fashion.
Only dispose of batteries when they are fully discharged.
Disposal of packaging
Dispose of the packaging materials in an environmentally responsible manner.
Display is blank/DVD player shows no functions even though it is switched on
ACheck to see that the power cord is properly plugged into the power socket.
BCheck to make sure that there is power at the power socket, in which you have plugged the DVD players power cord, by connecting another appli- ance to the socket. If necessary plug the DVD players power cord into an- other power socket.
CCheck to make sure that the display is not switched off by the Dimmer
function. To do this press the 
DIMMER button on the remote control.
DSwitch off the DVD player by pressing the POWER button and wait ten se- conds. Then switch the DVD player back on by pressing the POWER button.
The display shows "No Disc" even though there is a disc inserted
AThe disc is dirty, scratched or damaged. Clean the disc or insert another disc.
BThe Country/Region code on the inserted
Inserted disc will not playback
It is possible that a layer of condensation has built up on the DVD players laser scan lens. This can be the case especially if the DVD player has been subjected to strong temperature fluctuations.
If this is the case place the DVD player in a dry environment at normal room temperature. First remove the currently inserted disc from the disc tray. Then leave the DVD player switched off for at least one hour without using until the condensation film has evaporated.
No image or Black/White image only
ACheck to make sure that all connection cables between the DVD player and the television (or Video projector) are firmly inserted into the corres- ponding sockets
BCheck to make sure that the settings in the OSD menu match the connec- tions variant, with which you have connected the DVD player to the televi- sion (or Video projector).
For this see chapter 8. "Connecting the DVD player to a television“.
CCheck by means of the televisions (or Video projectors) operating instruc- tions to see if settings to the television (or Video projector) may be neces- sary in order to use the DVD player with the television.
No sound
ACheck to see if the television and/or the DVD player has been switched to mute.
BCheck to see that all connecting cables between the DVD player and po- tentially connected audio components are firmly plugged into the corresponding sockets
CCheck to make sure that the settings in the OSD menu match the connec- tions variant, with which you have connected the audio component to the DVD player.
For this see chapter 9. "Connecting an audio component to the DVD player“.
- 24 -
