Sim2 Multimedia HT305 installation manual On Screen Menu

9 ON SCREEN MENU

SOURCE SELECTION

The input selection menu (Inputs) is called by pressing 0 on the remote control and, when no other menu is displayed, using

the È/Í keys on the keypad. To select an input, scroll the list with the È/Í keys until the desired input is highlighted, then

press Ë.

Display of the input selection menu is terminated by pressing the ESC key, or when the time allowed for displaying the on-screen menu has lapsed (set in the Set-up Menu).

Input 3 can receive RGB and YCrCb signals, at 15 kHz, 32 kHz or higher. The association between the input and the type of signal is made from the pull-down menu that appears on the

right of the < symbol after pressing the Á key (Fig. 26b).

In the pull-down menu it is also possible to choose the horizontal frequency or use the AutoSync feature;in this case the system detect the horizontal frequency signal (15KHz,32KHz or higher) automatically.

Inputs

1	VIDEO	1
2	S-VIDEO	2
3	COMPONENT/RGBS 3		RGBS 15kHz
4	GRAPHICS RGB	4
5	HDMI	5

			Fig. 26a
Inputs
1	VIDEO	1
2	S-VIDEO	2	YCrCb AutoSync
3	COMPONENT/RGBS
4	GRAPHICS RGB	4	YCrCb 15KHz
5	HDMI	5	YCrCb
			RGB AutoSync
			RGB 15KHz
			RGB
			Fig. 26b

After selecting the source signal (by means of the È/Í keys), press MENU+/MENU - to confirm and close the pull-down menu; the value you have just set will be displayed on the right of the < symbol.

As with the other inputs, you can now select the input just set

by pressing the Ë key.

During the short time it takes to find the signal, a box appears showing the signal requested. As soon as the signal is shown in the box additional information is displayed concerning the video standard (for video signals) or resolution (for graphic signals), and format.

Fom the SETUP menu it is possible to choose to visualize or not this information, for more details check the “SOURCE INFORMATION” in “MENU” section.

MAIN MENU

To access the main menu of the On Screen Display press the MENU key on the keypad or the MENU+ or MENU- key on the remote control.

The main menu is divided into four windows, PICTURE, IMAGE, SETUP and MENU, in which the various adjustments are grouped

according to the frequency of use. Use È/Í to select the line corresponding to the adjustment you wish to make (Fig. 27). The various menus only offer the relevant adjustments in ac-

Picture

Brightness	60
Contrast	50
Color	50
Tint	50
Sharpness	3
Filter	2
Cinema Mode	Off		Auto
Video Type	Normal	VCR1 VCR2
Noise Reduction	Auto			Fig. 27

cordance with the type of input signal displayed (e.g. certain typical adjustments for video signals, not necessary for graphic signals, do not appear on the menus, and vice versa).

Some adjustments (e.g. Brightness and Contrast) are associated with Á/ËÈ/Ía numerical value that can be varied within the

set limits using the keys Á/Ë. For others (e.g. VIDEO TYPE) you can choose among three options presented on the same

Á/Ë).

Other adjustments (marked by the < symbol) provide submenus,

17