Please follow carefully the warnings listed below, to ensure safe and long term performance of your projector.
•Connect the projector to a power supply with a nominal voltage within the following values:
|
|
|
|
|
|
|
| ne pas | compromettre | ||||
|
|
|
|
|
| pour |
| d'incende | |||||
|
|
|
|
|
|
| les resque |
| type | ||||
|
|
|
|
| contre |
| de meme |
| |||||
| ATTENTION: | un | fusible |
|
|
|
| ||||||
| la | protection |
|
|
|
|
|
| against | ||||
|
|
| par |
| cteristique |
| |||||||
| remplacer |
| cara |
|
|
| protection | ||||||
| et | de mems |
|
|
|
|
|
|
|
|
| ||
|
|
| for continued |
|
|
|
| ||||||
| CAUTION:replace |
|
|
|
|
|
| ||||||
| risk of | fire, |
|
|
| type |
|
|
|
|
| ||
|
| same |
|
|
|
|
|
|
| ||||
| only with | fuse. |
|
|
|
|
|
|
| ||||
| and rating |
|
|
|
|
| AUDIO |
| |||||
3 |
| 5 | DIGITAL |
|
| OUT |
|
| |||||
|
|
|
|
|
|
| |||||||
pas | compromettre | ||||
|
| d'incende | |||
resque |
| type | |||
le de | meme |
| |||
ique |
|
| against | ||
ed | protection | ||||
|
|
|
|
| |
1
AUDIO OUT
2
4
250 V
T 3.15A H
3
Fig. 4
INPUT |
100-240 Vac
50/60 Hz
Fig. 3
•The mains plug is the disconnect device. Take care, when installing, that the mains plug and socket outlet are easily accessible. Never pull on the cable to take it out of the socket. If the system is unlikely to be used for a number of days, disconnect the power cable and other apparatus connected to it.
•To save energy, switch off the projector by using the power switch at the rear; when in
•Only replace the safety fuse (on the power socket at the rear of projector) with a fuse identical in type and characteristics (T 3.15A H) (Fig. 4).
•Do not switch on your projector when flammable liquids or fumes are present. Do not pour or drop fluids in the vents.
•Do not use the projector when the room temperature is
above 35°C (95°F).
•Do not obstruct the cooling air inlets on the top cover, or the air outlets underneath the projector.
•Do not switch on the projector if it is standing on soft sur- faces such as cushions, pillows, blankets, mattresses and carpets: the air cooling outlets underneath could become obstructed.
•Do not
•Intense Light Source! Do not stare directly into the projection lens as possible eye damage could result. Be especially careful that children do not stare directly into the beam.
•Do not open the projector’s cover; no user serviceable parts are inside. Refer servicing to qualified service personnel. Opening the projector’s cover will invalidate warranty.
•Take care not to shake the projector whilst carrying it by the handle.
•Always position the projector away from direct heat sour- ces.
•Do not touch the surface of the projection lens.
