![](/images/new-backgrounds/1202138/20213821x1.webp)
cables. This is to allow the fans in the Display unit sufficient time to cool the lamp.
KEYPAD
The keypad on the back of the Display features eight keys providing the facility for complete control of the apparatus even without the remote control.
MENU
Activates the On Screen Display menus. Navigates menu pages.
Switches system to
Navigate through and make adjustments to the on screen menus.
switches on from
(if pressed in the absence of the On Screen Display) calls the INFO information window
MENU
ESC AUTO
ESC
Deactivates the On Screen
Display AUTO
Selects Auto Adjust (automatic optimisation of the displayed image).
Fig. 9
REMOTE CONTROL
The remote control transmits commands to the system by infrared signals.
There are two infrared sensors, one at the front of the Display and one on the front panel of the DigiOptical Image Processor.
Avoid placing obstructions between the remote control and the infrared sensor at the front of the projector; this will impair the remote control performance.
The remote control requires four 1.5V AAA alkaline batteries. Insert the batteries, taking care to match the polarity, as indicated in the battery compartment in the handset (Fig. 10). Change the remote control batteries if you experience difficulty in transmitting commands to the system.
Remove batteries from the remote control if it is to remain unused for a long period of time to avoid the risk of potentially harmful chemical leaks.
-+
+-
- +
+-
Four 1.5V AAA-type batteries
Fig. 10
11