Sim2 Multimedia RTX55H installation manual Keypad, ESC Auto

In case the Display unit is shut down (for example due to a shut down of the Display unit by putting the switch in the “O” position or by accidentally unplugging the power cord cable) to re-boost the RTX system it is necessary to shut down the DigiOptic™ Image Processor and repeat the power-on procedure described in point 1 and 2.

MENU

ESC

AUTO

Fig. 8

Switching the system off (Fig.9):

•from the remote control ( key)

•from the Display keypad ( key).

If you wish to power off the system completely, wait at least one minute in stand-by before setting the mains power switches on the units to the “O” position or disconnecting the power supply cables. This is to allow the fans in the Display unit sufficient time to cool the lamp.

ES

C

A	ME
U
TO	NU

Fig. 9

5 KEYPAD

The keypad on the back of the Display features eight keys providing the facility for complete control of the apparatus even without the remote control (Fig.10).

	MENU	￿￿￿￿
Activates the On Screen Display menus.		Navigate through and make adjustments to the on screen menus.
Navigates menu pages.		￿￿ switches on from stand-by and calls the Input Selection menu.
		￿ (if pressed in the absence of the On Screen Display) calls the INFO
		information window

Switches system to stand-by.

	MENU
ESC	AUTO

ESC

AUTO

Deactivates the On Screen Selects Auto Adjust (automatic optimisation of the displayed image).

Fig. 10

Display

11