Sim2 Multimedia RTX55H installation manual Installation, Connecting the TWO Units

3 INSTALLATION

CONNECTING THE TWO UNITS

SIM2’s RTX system is made up of the following components		If any accessories are missing, contact your Dealer as soon as
(Fig.1):		possible.
•	Display	The RTX system consists of two separate units (the DigiOptic™
•	DigiOptic™ Image Processor	Image Processor and the Display), each of which is equipped
•	remote control	with a power cable; the two units are interconnected by a 20 m
• DigiOptic™ Image Processor power supply unit		fibre optic cable.

•three power cables for the Display

• three power cables for the DigiOptic™ Image Processor	The ideal location for the DigiOptic™ Image Processor is on a
• triple fibre optic cable for linking the	cabinet shelf or on a rack (dimensions compatible with a stan-
DigiOptic™ Image Processor and the Display	dard 19" rack). Make sıre that the support surface is stable and
• one cable HDMI™-HDMI™	that the unit has sufficient space around it for ventilation
• one cable HDMI™-DVI	purposes (at least 3 cm).
• two brackets for mounting the DigiOptic™ Image Processor to	The unit is connected to the mains via an external power supply
the rack.	unit with an output of +7 Vdc; the unit’s main power switch is
• four 1.5 V AAA-type batteries for the remote control	on the power supply unit.
• User and installation manual	Connect the power supply unit output cable to the POWER
	socket located on the rear panel (Fig. 6).
Display	Use exclusively the power supply unit provided with the system
	or an alternative power supply unit expressly approved by SIM2.
Instruction
Manual	The Display is designed to stand on the floor. Place the Display
	on a flat, level surface where it has sufficient space for
DigiOptical Image	ventilation; to prevent glare and reflections, avoid places
	exposed to direct sunlight or intense light sources.
Processor power
	The mains power input socket and the power switch are both
supply unit
	located on the rear panel.
DigiOptic™	Adjust the rear feet to obtain the optimum viewing angle in
Image Processor
Remote Control
1.5 V AAA-
type batteries

Three-core fibre optic cable

DIGIOPTI
C ™I
MAGE
PRO	CESSOR

ON

OFF

Support

Cable HDMI™-HDMI™

Cable HDMI™-DVI

Power cables
Europe, UK, US (x2)	Fig.2
Fig.1

5