Input 11 is capable of receiving YCrCb or RGB signals coming from
The selection should be made from the drop menu following the indications described above.
After selecting the source signal (by means of the and keys), press MENU+/MENU - to confirm and close the pull- down menu; the value you have just set will be displayed on the right of the symbol.
As with the other inputs, you can now select the input just set by pressing the key.
During the short time it takes to find the signal, a box appears showing the signal requested. As soon as the signal is shown in the box additional information is displayed concerning the video standard (for video signals) or resolution (for graphic signals), and format.
Fom the SETUP menu it is possible to choose to visualize or not this information, for more details check the “SOURCE INFORMATION” in “MENU” section.
MAIN MENU
To access the main menu of the On Screen Display press the MENU key on the keypad or the MENU+ or MENU- key on the re- mote control.
The main menu is divided into four windows, PICTURE, IMAGE, SETUP and MENU, in which the various adjustments are grouped according to the frequency of use. Use and to select the line corresponding to the adjustment you wish to make (Fig. 13).
Picture
Brightness | 60 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Contrast | 50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Colour | 50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Tint | 50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Sharpness | 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Filter | 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Cinema Mode | Off |
| Auto | ||||||||||
Video Type | Normal | VCR1 VCR2 | |||||||||||
Noise Reduction | Auto |
|
|
|
|
|
|
|
|
| Fig. 13 | ||
|
|
|
|
|
|
|
|
|
|
|
|
| |
The various menus only offer the relevant adjustments in accordance with the type of input signal displayed (e.g. certain typical adjustments for video signals, not necessary for graphic signals, do not appear on the menus, and vice versa).
Some adjustments (e.g. BRIGHTNESS and CONTRAST) are associated with a numerical value that can be varied within the set limits using the keys / . For others (e.g. VIDEO TYPE) you can choose among three options presented on the same
/ ).
Other adjustments (marked by the < symbol) provide submenus, which appear as a superimposed window in which the selection is made with the / keys (Fig. 14).
Image
Aspect
Colour Temperature
Gamma Correction
Overscan1
Position
Y/C Delay | 1 |
Fig. 14a
Image |
|
|
Aspect |
| Normal |
Colour Temperature |
| Anamorphic |
Gamma Correction |
| Letterbox |
Overscan |
| Panoramic |
Position | 1 | Pixel to pixel |
Y/C Delay |
| User 1 |
|
| User 2 |
|
| User 3 |
Fig. 14b
These submenus are accessed by pressing the key, while exit and return to the upper level occurs by pressing
PICTURE
This menu features the adjustments related to picture quality. Adjustments that are not available for a given input do not appear on the menu. Table 4 summarises the adjustments available for each input. For a complete overview of the on- screen menus, consult the ‘On screen menu layout’ in the “Additional Information” section.
13
