Sim2 Multimedia RTX55H installation manual Remote Control, On Screen Menu, Inputs

6 REMOTE CONTROL

The remote control transmits commands to the system by infrared signals.

There are two infrared sensors, one at the front of the Display and one on the front panel of the DigiOptic™ Image Processor.

Avoid placing obstructions between the remote control and the infrared sensor at the front of the Display; this will impair the remote control performance.

The remote control requires four 1.5V AAA alkaline batteries. Insert the batteries, taking care to match the polarity, as indicated in the battery compartment in the handset (Fig. 11). Change the remote control batteries if you experience difficulty in transmitting commands to the system.

Remove batteries from the remote control if it is to remain unused for a long period of time to avoid the risk of potentially harmful chemical leaks.

-+

+-

- +

+-

4 1.5 V AAA-type batteries.

Fig. 11

8 ON SCREEN MENU

All system functions can be activated from the keypad or remo- te control with the aid of a practical and comprehensive system of on screen menus.

INPUTS

The input selection menu (Inputs) is called by pressing 0 on the remote control and, when no other menu is displayed, using the ￿ and ￿ keys on the keypad. To select an input, scroll the list with the ￿ and ￿ keys until the desired input is highlighted, then press ￿.

Display of the input selection menu is terminated

by pressing the ESC key, or when the time allowed for displaying the on-screen menu has lapsed (set in the Set-up Menu). Input 5 can accept RGB and YCrCb signals with a scan frequency up to 32Khz.

Inputs 6, 7 and 8 can receive RGB and YCrCb signals, at 15 kHz, 32 kHz or higher. The association between the input and the type of signal is made from the pull-down menu that appears on the right of the < symbol after pressing the ￿ key (Fig. 12b).

Inputs

1	VIDEO 1	1
2	VIDEO 2	2
3	S-VIDEO 3	3
4	S-VIDEO 4	4
5	COMP/RGB 5	5	YCrCb 32kHz
6	COMP/RGB 6	6	RGBS 15kHz
7	COMP/RGB 7	7	YCrCb
8	COMP/RGB 8	8	YCrCb 15kHz
9	GRAPH RGB 9	9
10	GRAPH RGB 10	10
11	DVI-D 11	11	YCrCb
12	HDMI 12	12

Fig. 12a

Inputs
1	VIDEO 1	1
2	VIDEO 2	2
3	S-VIDEO 3	3
4	S-VIDEO 4	4
5	COMP/RGB 5	5	YCrCb 32kHz
6	COMP/RGB 6		RGBS 15kHz
7	COMP/RGB 7	7	RGBSYCrCb
8	COMP/RGB 8	8	YCrCbYCrCb15kHz15kHz
9	GRAPH RGB 9	9	YCrCb
10	GRAPH RGB 10	10
11	DVI-D 11	11	YCrCb
12	HDMI 12	12

Fig. 12b

12