Chapter 5
Loading pre-programmed codes
The SUR-20 is pre-programmed with many manufacturers’ codes to operate a wide range of TVs, VCRs, DVDs etc… These are useful if you have lost the original remote. However, because of the great variety and number of remotes on the market, not all functions may work when using the pre-programmed codes. If you have the original remote, it is recommended you teach the SUR-20 the functions most important to you (Ch. 4). You can directly access the manufacturer’s code for your device by following the steps below. Note: some codes are designed to operate more than one model. It may take several tries to find the code that works with your unit.
Press the LEARN button for three seconds.
You will hear two beeps and then see the password screen to the right.
Note: This screen prevents you from accidentally modifying the SUR-20.
Press each number button until it disappears.
