Sima Products SUR-20 user manual You may need to set a time delay between turning on the VCR

The SUR-20 User’s Manual

etc… will not be activated as the macro commands are being entered. The macro only works when the SUR-20 is in its normal operational mode.

Press the power button. This will power the TV on when the macro is running.

Press TV/Video. This command will switch the TV mode to Video mode so that you can watch the VCR tape.

Press the VCR device screen button to switch to the VCR device menu.

This will enable you to construct a series of commands for the VCR.

1

1

Press the power button. This powers your VCR on while the macro is running.

1

You may need to set a time delay between turning on the VCR

32