Troubleshooting Guide | Sima Products SUR-20

Troubleshooting Guide (Cont.)

Macro does not	•	Be sure to aim SUR-20 at devices while macro
work		commands are being sent.
	•	Macro was not properly set up. Repeat macro
		set-up procedure ( Chpt. 7).
Record button	•	Record button has a three-second safety delay
does not work		to prevent accidental recording. Press and
		hold REC button for three seconds.
A button performs	•	Some remotes issue multiple commands when
its function two or		a button is held down. Re-teach the button
more times		being sure to release the button on your
		existing remote quickly when teaching the
		SUR-20.
The LCD screen	•	The SUR-20 is preset at the factory to
turns off.		automatically switch the LCD off after 20
		minutes if left unused. Just tap the LCD
		screen to turn the SUR-20 back on again.

See our web site www.simacorp.com for more information. Or call Sima at 800-345-7462