82387 No. 66
ADJUSTABLE HEMMER
Hemming
Remove the presser foot and attach the adjustable hemmer in its place as shown in Fig. 25. This hemmer will turn hems from 3/16 inch to 1 inch wide. The adjustment is made by loosening the thumb screw on the hemmer and moving the slide to the right or left until the hem turned is of the desired width. Enter the edge of the cloth into the hemmer under the scale and draw it back and forth until the hem is formed, stopping with the end under the needle. Lower the presser bar and commence to sew, being careful to guide cloth as to keep hemmer full. Felling can also be done with the adjustable hemmer
ADJUSTABLE HEMMER
Wide Hemming
To make a hem more than one inch wide take out the thumb screw in the hemmer and remove the slide and pointer; fold and crease down a hem of the desired width; pass the fold under the extension at the right of the hemmer, and the edge into the folder as shown in Fig. 26 and proceed to stitch the hem.
FIG. 25
FIG. 26
Table of Contents | Previous Page Next Page |
20
