82387 No. 66
To Ensure Perfect Action of the Machine
The balance wheel must always turn over toward the operator.
Do not run the machine with the presser foot resting on the feed without cloth under the presser foot.
Do not run the machine when both bobbin case and needle are threaded unless there is material under the presser foot.
Do not try to help the machine by pulling the fabric lest you bend the needle. The machine feeds the work without assistance.
The slide over the bobbin case should be kept closed when the machine is in operation.
FIG. 4. REMOVING THE BOBBIN
To Take Out the Bobbin
Draw to the left the slide in the bed of the machine and press the forefinger of the right hand upon the bobbin ejected as shown above; this will raise the bobbin so that it can be easily taken out.
Table of Contents | Previous Page Next Page |
5
