82387 No. 66
RUFFLER WITH SHIRRING PLATE
Shirring
To attach the shirring plate (see Fig. 20) draw to the left the slide that covers the bobbin case, insert the downwardly projecting hooks on the shirring plate under the edge of the throat plate, push as far as possible to the right and press the pin into the hole at the right of the throat plate, then close the slide covering the bobbin case.
The lower or separator blade of the ruffler is fastened by a screw. Loosen the screw, take off the separator blade and attach the ruffler to the presser bar as instructed.
FIG. 32
Place the cloth between the ruffling blade and the shirring plate, lower the ruffler on the goods and operate as in ruffling.
Table of Contents | Previous Page Next Page |
24
