82387 No. 66
EMBROIDERY AND DARNING
While embroidery anti darning can be done on the machine when threaded for regular sewing, the use of feed cover plate (B. Fig.
36)No. 32622 is recommended, as movable contact with the feed in some cases might interfere with the handling of the work.
Do not change the adjustment of the feed dog in any way as it is essential that its posi- tion should remain as originally fixed.
When the feed cover plate (B. Fig. 36) is used it is necessary to lead the needle thread through the eye in the thread regulator (A, Fig. 36) at the left of the tension discs, and not under the thread regulator. With this exception the threading is the same as for regular sewing (see Fig. 11).
Remove the presser foot and let down the presser bar lifter to restore the tension on the needle thread, which is released and inopera- tive when the lifter is raised.
To attach the feed cover plate draw to the left the slide that covers the bobbin case and insert the downwardly projecting hooks on the cover plate under the edge of the throat plate and push to the right. After bringing the hole at the right of the cover plate in line with the hole in the throat plate, press the cover
into position, and close the slide (see Fig. 36).
Feed cover plates are not included in the reg- ular sets of attachments; they are on sale at all Singer shops at the price of ten cents each.
Table of Contents | Previous Page Next Page |
28
