82387 No. 66
FOOT HEMMER
Hemming and Sewing on Lace
Start the hem as previously explained, and when it is well started raise the needle to its highest point.
Raise the hemmer to relieve its pressure on tile hem, pass the end of the lace through the slot in the side of the hemmer, under the back of tile hemmer and over the hem, as shown in Fig. 22.
Take care that the hem is not displaced in the hemmer and that the needle goes down through the lace and hem together. Then let down tile presser bar and guide the lace over the front of the hemmer, keeping it well into the slot.
Table of Contents
FIG. 22
Previous Page Next Page
18