The next diagram shows the same configuration as the previous illustration. You can see that one output of the multiswitch is connected to the input of the Combiner, and that there are no devices such a splitter or DishPro adapter in the common cable run between the Combiner and Splitter. If a DishPro adapter is needed, it must be installed after the Splitter as shown.
WITHOUT DISHPRO ADAPTER: | WITH DISHPRO ADAPTER: |
COMBINER 
COMMON
CABLE RUN
MULTISWITCH
COMBINER 
COMMON
CABLE RUN
MULTISWITCH
SPLITTER 
SPLITTER 
RECVR/TUNER
RECVR/TUNER
DISHPRO ADAPTER
SIRIUS 
RECEIVER 
RECVR/TUNERs
SIRIUS RECEIVER
RECVR/TUNERs
14 | Home Signal Distribution Kit Installation Guide |
