4. Adjusting and Aiming the Antenna
The pod portion of the antenna (where the SIRIUS logo is printed) needs to be adjusted and aimed so that it is level and horizontal to the sky. There are two possible adjustments that may be made on the antenna to accomplish this: tilting the antenna pod itself (1), and adjusting the antenna support arm (2), as shown.
SKY
HORIZONTAL 
LEVEL
Antenna Pod 
1
2 | Adjustment |
| Screw |
Adjustment
Screw
Slightly loosen the adjustment screws and position the antenna so that the top of the antenna pod is level, with the top of the pod horizontal to the sky as shown. When the antenna is adjusted correctly, tighten the adjustment screws but be careful not to overtighten them.
Continue with the installation procedure for your particular configuration:
—Simple Configuration Installation Procedure (Single LNB, No Multi- switch) on page 28
—Before Multiswitch Configuration Installation Procedure on page 30
—After Multiswitch Configuration Installation Procedure (Multiswitch on Roof) on page 32
—After Multiswitch Configuration Installation Procedure (Multiswitch Inside Home) on page 34
Home Signal Distribution Kit Installation Guide | 27 |
