Sirius Satellite Radio SR-101C manual Multiswitch

4.Disconnect the cable from the satellite dish LNB and connect it to the

COMBINED OUT port on the Combiner (SR2261) as shown. (Refer to page 5 for the Combiner port identification.)

5.Using one of the RG-6 cables which you purchased, connect it between the satellite dish LNB and the DBS IN port on the Combiner (SR2261) as shown. (Refer to page 5 for the Combiner port identification.)

Step 6 Step 8 Step 9

Combiner Splitter

C S

Step 7

M

Step 10 Multiswitch

6.Disconnect the existing cable run from the multiswitch and connect this end of the cable to the COMBINED IN port on the Splitter (SR2251) as shown. (Refer to page 5 for the Splitter port identification.)

7.Connect another of the RG-6 cables you purchased between the multi- switch and the DBS TV port on the Splitter (SR2251) as shown. (Refer to page 5 for the Splitter port identification.)

8.Connect another of RG-6 cables you purchased between the SIRIUS OUT port on the Splitter (SR2251) and the F connector end of the supplied RG- 174 Adapter cable as shown. (Refer to page 5 for the Splitter port identifica- tion.)

9.Connect the other end of the RG-174 Adapter Cable to the ANT connection on your SIRIUS radio as shown.

10.Verify that the satellite TV receiver/tuner is plugged into a working AC out- let. Next, connect the provided AC Power Adapter to the POWER IN port of the Splitter (SR2251), and plug it into a working AC outlet.

The installation is now complete.

Home Signal Distribution Kit Installation Guide 31