This chapter provides information to help setup the development environment for
the NEEK board.
2.1 NEEK BSP SOPC System
The Figure 1 below shows the block diagram of NEEK BSP SOPC system.
Figure 1 : NEEK BSP SOPC System
VGA ControllerLCD Controller
UART
DDR SDRAM
32MB
SSRAM
1MB
Flash
16MB
10/100 Ethernet
MAC
PS2
Controller
I2S
controller
SD card
controller(1-bit)
Nios II / F
Processor
NEEK Development Board
Developed by SLS
2.2 Development Environment
The Nios II embedded development environment consists of two systems: a host
system and a target system. The host system is used for compiling, linking,
remote debugging, and associated development activities. The target system, such
as the NEEK board, is used for application development and testing (Figure 2).
The board acts as a target for application development
System Level Solutions 5