uClinux NEEK BSP uClinux NEEK BSP Development Environment
1. Open the Linux terminal.
2. On the terminal, change into the $home/uClinux/uClinux-dist directory
and change the environment path. Use one of the four main kernel
configuration methods to start the configuration menu.
#cd /home/uClinux/nios2-linux/uClinux-dist
#PATH=$PATH:/home/uClinux/Bintools/opt/nios2/bin
6. Configure the kernel
#make clean
#make menuconfig
You will see the Kernel configuration main menu as shown in
Figure 3.
Figure 3 : Linux Kenrel Configuration Main Menu
Use one of the two main kernel configuration methods to start the
configuration.
Use or arrow to select the menu item and then press to go into
the submenu. Use or and then press to select the menu
command “<Select>” “<Exit>” or “<Help>” throughout the
configuration.
Configuring Vendor/Product Settings
1. Select the submenu Vendor/Product Selection ---> from the Figure 3.
press Enter. You will see Vendor/Product Configuration window. See
Figure 4
System Level Solutions 9