29 | CHAPTER 3 – USING YOUR INTERACTIVE WHITEBOARD SYSTEM
Network Network
and VGA
Out
The VGA out and Network features are Off by
default. Select On to activate these features.
Status Displays the current network status as Connected,
Disconnected or Off.
DHCP Displays the status of the network’s Dynamic Host
Control Protocol (DHCP) as On or Off.
•On automatically assigns the DHCP server’s IP
address to the projector.
•Off enables an administrator to assign an IP
address manually.
Password
Reminder
E-mails the network password to the mail recipient.
See page 61 in the section on Web Page
Management to set up a destination e-mail address.
IP Address Displays the projector’s IP address in values between
0.0.0.0 and 255.255.255.255.
Subnet
Mask
Displays the projector’s subnet work mask number in
values between 0.0.0.0 and 255.255.255.255.
Gateway Displays the projector’s default network gateway in
values between 0.0.0.0 and 255.255.255.255.
DNS Displays the projector’s primary domain name number
in values between 0.0.0.0 and 255.255.255.255.
MAC
Address
Displays the projector’s MAC address in
xx-xx-xx-xx-xx-xx format.
Group
Name
Displays the projector’s workgroup name as set by an
administrator (maximum 12 characters).
Projector
Name
Displays the projector’s name as set by an
administrator (maximum 12 characters).
Location Displays the projector’s location as set by an
administrator (maximum 16 characters).
Contact Displa ys the contact name or number for projector
support as set by an administrator (maximum 16
characters).
Menu
Heading Settings Description